Affirmative Action in the Sphere of Higher Educational Establishments The Importance of Being Decisive

Supply Mgmt Case Studies Essay Example

Supply Mgmt Case Studies Essay Example Supply Mgmt Case Studies Essay Supply Mgmt Case Studies Essay What are the most likely benefits of forming strategic supply alliances with Sunspots key suppliers? A strategic alliance between Sunspot and its key suppliers will result in a relationship based on trust. Its key for both parties to develop and manage this Institutional trust or the alliance will fall. Trust will facilitate communication which will lead to less errors and higher quality, faster development times, and lower costs. Synergies created by alliances result in reductions of direct and indirect costs associated with labor, machinery, materials, and overhead. Other benefits are reduced time to market, improved technology flow from suppliers, and Improved continuity of supply. With strategic alliances, all parties have a stake In the success of Sunspots business. Instructor Comments: 2. What are the disadvantages or risks of such alliances? Alliances are a resource- intense approach to supply management with several disadvantages or risks. Theres a danger the supplier will act in an opportunistic manner over time; perhaps Sunspots electronic systems dont allow for optimum Information sharing and communication with its suppliers. Mr.. Bart Lyons will have to ensure he has a supply manager who is trained in managing alliance partnershipsif not, the alliance will fail. Sunspot will have to accept added risk associated with reducing the supply base. Both the supplier and buyer need be aligned In what their ultimate customer considers valuable and In their respective villous thus able to make long term commitments to each other. Sunspot must determine if the benefits of an alliance outweigh the effort, risk. And resources required. 3. How can these disadvantages be offset? The three most important factors in a successful buyer-supplier relationship are two- way communication; the suppliers responsiveness to supply managements needs; and clear product specifications. To offset the risk and/or disadvantages actions can be taken to appoint an inter-film team that receives guidance and training in the implementation of practices. Additionally, the firms can develop a communication system that addresses risks and rewards openly. They can take actions to develop and measure trust, as well as, use negotiation as a trust-building opportunity. Addressing the risk and disadvantages early will aid in the success of the relationship and both firms. Case u y e revel 1. Discuss the basic inventory problem confronting this firm. Mrs.. Glass made the decision to reduce cost by reducing inventories without considering the problems it would cause for other functions. This created a shortage of inventory causing increased cost by using air freight to meet demand while keeping the companys commitment to the customer for prompt delivery. 2. Air freight bills keep growing both in numbers and in total dollar value of freight reinserted. What are the factors that have contributed to the development of this situation? Do they reflect efficient or inefficient management of supply, inventories, and production in firms such as this one? Discuss. Air freight bills keep growing because of the lack of inventory on hand to run a complete production. One factor contributing to this situation is the companys promise of prompt delivery without regard to what the companys actual capability is. Another includes decisions being made by one department without consideration of the how it would affect the entire Hahn or timely information on sales forecasts. It appears the company has not yet found an organizational structure and governance process that will allow the supply chain to function effectively and efficiently. Additionally, prior to this meeting it seems there was no cross-functional approach to supply management. Decisions are being made without team synergy, input from all affected functions, and effective problem resolution. As materials gain in importance, becoming a larger proportion of the cost of goods sold, issues such as inflated inventories, poor quality, material tock-outs, long lead times, and miscommunication provide the impetus for a movement to capture control of materials under one individual. This gave rise to the materials management approach to structuring the material portion of an organization. 3. What should Joan Glass do? Joan must start with the basics of setting up the materials management organization to provide an integrated systems approach to the coordination of materials activities and the control of total material costs. She also needs to evolve the supply chain management structure to encompass the planning and management of all activities involved in forecasting, sourcing, and procurement and all incoming logistics management activities. It will create integrated processes throughout the organization. Setting up a cross functional team will address many supply management related activities. In addition, policy will need to be established to ensure all parties know their respective roles and expected involvement. Snouts Glass suggest a materials manager Absolutely, she should suggest a materials manager to have control and responsibility for the purchasing, planning and scheduling, transportation, and warehousing functions. This will optimize the performance of the materials system resulting in improvements in inventory levels, customer service, and communications, ultimately improving the bottom line. However, she must also suggest organizing the cross-functional team so the materials manager will have broader information to make smarter decisions. 5. Should Glass build up her inventories? Considering the facts known in this case, she should first determine if process improvements would resolve the issue prior to accepting additional cost of larger inventories. There are several areas to consider with regard to process improvements. The traffic manager stated that Joan spreads the small orders so he can never find a way to consolidate them to get volume rates. There is probably a more efficient way to combine the small orders know that Joan knows the issues. He also stated he is having problems with outgoing shipments. He could probably negotiate with the transportation company on incoming and outgoing shipments which could also lower air freight costs. The marketing manager is promising customers prompt delivery but has he thought to promise what the actual capability is and many customers might accept that. Joan needs access to earlier sales forecasts. There may be a way for her to get real time access. By building up her inventory, Joan has not resolved the issues. I believe she should consider the many areas of process improvements shown in this case. Case Study #3 Pacific Healthcare 1. What alternatives should Barney Rubble consider when addressing the problem? Since Mr.. Howell had control over the supplier selection, it suggests that the company has a decentralized purchase authority policy. Mr.. Rubble should consider if centralized or decentralized authority is best for the company. Additionally, Mr.. Rubble must consider the total cost. If he stays with Kodak, then he benefits from the maintenance and service discount. If he chooses competitive bids from different sources, then he must find another company to perform the services. If he chooses to negotiate with Kodak, he could try for a lower total cost with a more attractive procurement situation. Mr.. Rubble will need to analysis the cost, benefits, and risks involved with all situations. Finally, Mr.. Rubble should make decisions based off of Pacific Healthcare supply strategy for medical supplies to obtain the highest quality tit the best service at the lowest overall cost. 2 Snouts Pascals supply polices allow Tort any meal star personnel to control sourcing decisions? There are advantages and disadvantages of decentralized purchasing authority. One Justification for decentralized purchasing authority is the purchase of unethical odds and ends which the X-ray film may fall into that category. However, partial decentralization of purchases may be the solution. Mr.. Rubble could change the policy so that he is involved in all sourcing decisions but allow the medical staff to do the actual purchasing. By using the cross-functional team concept, all parties can have input and make better purchasing decisions. 3. What are the advantages and disadvantages of staying with Kodak or changing suppliers? How would you evaluate these? By staying with Kodak, the price and quality is higher and the company benefits from the maintenance and service discount. By changing suppliers, the cost would be lower but an additional requirement for maintenance and service will need to be fulfilled. On the surface it would appear that competitive bidding could fill the requirement however I believe estimations is the best option since the maintenance and service will also be required. Pacific Heathers objective is to find a single-source supplier for a one year contract. Mr.. Rubbles market research should show not only the quality and costs of the film but the service and maintenance quality and costs as well. If Kodak ends up being the best value meeting the companys supply strategy and objectives, then he should pursue a long term alliance. 4. What action could Mr.. Rubble have taken prior to Mr.. Howls death to obtain reduced film prices? Mr.. Rubble could have encouraged top management to establish a better policy on the purchasing authority. He could have created cross- functional teams to better understand the departments sourcing concerns, as well as, ensured collaboration and buy in. Supply managers cannot forget their internal customers. Mr.. Rubble could have also taken advantage of Mr.. Howls long standing relationship with Kodak to open the doors for negotiation. Case Study #4 The Case of the Sleeping Dogs 1. Is it an ethical problem for a supply manager to buy something he or she knows is ad for the environment, or to avoid buying something known to be environmentally safe?

Analyze a Catholic Mass Essay Example | Topics and Well Written Essays - 750 words

Analyze a Catholic Mass - Essay Example The priest used incense to reverence the alter before each one of the ministers proceeded to their seats but remained standing. The priest greeted the congregation â€Å"in the name of the father and of the Son, and of the Holy Spirit† to which people responded by chanting the same words and making the sign of the cross, followed by â€Å"Amen†. The priest proceeded to speaks the words of the grace to which the congregation responded. Part of the mass involved the blessing and sprinkling of water. The priest made a brief prayer thanking God for the gift of water and asking Him to bless the water in the name of â€Å"Christ our Lord† to which the congregation responded with an â€Å"Amen†. The priest proceeded to sprinkle the blessed water on the congregation using what looked like a flywhisk. As he did this, the congregation engaged in singing a song. The conclusion of this rite was marked by a brief chant or prayer from the priest asking God to cleanse our since and worthy to partake of heavenly riches. Part of the mass involved reciting of the acclamations â€Å"Lord have mercy† and the singing of the song â€Å"Glory to God in the highest†. After singing and chanting the songs, someone went to read the bible for the first reading and a minister read the second reading. Between the readings, the congregation engaged in singing a psalm. The priest then proceeded to elaborate on the sc riptures that had been read followed by the proclamation of faith which involved the chanting of the apostle’s creed. The priest presided over the Eucharist which involved the breaking of break, Holy Communion, prayer, meditation and singing. The mass ended with the priest proclaiming a blessing upon the faithful. The Catholic mass involves a lot of rights and rituals which fall within the seven dimensions of religion that were postulated by Ninian Smart. Smart noted that the dimensions of religion include

The Effect of Sildenafil on mouse oocyte development in vivo followed Literature review

The Effect of Sildenafil on mouse oocyte development in vivo followed by in vitro culture until the blastocyst stage - Literature review Example ersity, Belfast, Glenn took samples of sperm from volunteers and bathed them in weak solutions of sildenafil citrate, to produce a dosage, equal to that found in the blood of a male who had consumed a tablet of the drug. The behaviour of the treated sperm was compared with another sample of untreated sperm. The findings indicate that sildenafil citrate increased the activity level of the sperms, but found that it damaged the acrosome of the sperm, which contains enzymes needed to dissolve the membrane of a womans oocyte. This meant that the acrosome breaks down early, and thus, it is not able to act on the womans eggs, and fertilisation does not take place (McKie, 2008). Sildenafil has been used with great success for the treatment of erectile problems in males since 1997 (Sher et al. 2000). The fact that NO synthase is present in the ovarian cells, the endometrium (Hattori and Tabata, 2006) and within the ovarian vascular network (Sher, et al. 2000) combined with the finding that its vasodilatory effects show a positive correlation to its concentration, oriented the researchers (Tamanini, et al., 2002) to use sildenafil as a treatment for hypertension and Intrauterine Growth Restriction (IUGR) during pregnancy (Sasser and Baylis, 2010). A research by Neithardt et al. (2005) studied the process of embryo after loading, by placing the catheter and a dose of sildenafil citrate, applied vaginally for 127 women who had difficulty in conceiving. After some time, the researchers found that the pregnancy rate of women with ET, was 52.4%, and at the same time, it was 34.9% for the group who were not administered the dose. The researchers therefore concluded that sildenafil citrate impacts the success of embryo transplant after loading. In a related research, Zinger et al. (2006) used sildenafil citrate to treat two infertile women, who suffered from the Ashermans syndrome. The women had a thin endometrium, and had subsequently failed to conceive in previous IVF

Right to Reject Vaccines Essay Example | Topics and Well Written Essays - 250 words

Right to Reject Vaccines - Essay Example The interaction may lead to the spread of any disease that might be existent in those children who are not vaccinated. The risk of infections is made greater without vaccination. Another reason why all pupils should be vaccinated is that, most of the vaccines are given free by the government and others have their prices levied too. Therefore, there should be no reason whatsoever for any school going pupil, not to be vaccinated. Finally, there have been reports that the majority of parents fail to follow the required schedule in giving their children the required vaccine. Therefore making it mandatory for school going children to be vaccinated before being admitted might make the parents follow up the whole schedule of vaccination. Through the action of schools, the spread of diseases in public places will be minimized, and most of the children will be vaccinated and the risk of being infected reduced too. The result will be a reduction in infant mortality by a significant

Wearable Motion Detection Technology to Detect Falls

Wearable Motion Detection Technology to Detect Falls Louise Patterson 1. Project Title The development of a fully working model using wearable motion detection technology to detect and alert to falls within the home. 2. Abstract The focus of this document concerns the research and methodology into the problem of people with care needs being able to live independently within their own homes with minimum intervention. Elderly people particularly tend to have an increased risk of falling and sustaining serious injury than younger people. Other people with certain medical conditions also have a higher risk of falling due to seizures, balance problems etc. Current fall detection alert systems are expensive and obtrusive. They require landline phone connections and a call centre network with access to personal information to contact the appropriate carer. Sensors are rarely waterproof and can be easily damaged. The way the sensors are carried on the body can irritate and become annoying to the patient. One of the biggest, most costly failures of current systems occur when a call button has been touched by accident, resulting in accidental alerts being sent to the call centre. The main objective of this research and proposed model is to provide an investigation into the possibility of using new technology to provide a more effective system. Which Such a system will work only for fall detection and send alerts to appropriate personnel with the option for camera access to enabling them to view situation on way to alert. Specifically the project seeks to discover if new ring motion detection technology can be used to provide a more cost effective way of detecting falls within the home. Provisioning of a sensor which is both waterproof and unobtrusive to the wearer, which can be used to send an alert via txt or email directly to carers, thereby removing the need for an expensive, dedicated landline alert system and call centre network. Table of Contents (Jump to) 1. Project Title 2. Abstract 3. Aims 4. Objective 5. Justification 6. Literature Review 7. Methodology 8. Work Plan 9. References 3. Aims The aim of the project is to develop a working model for fall detection using motion detection technology in the form of a wearable ring, thereby replacing current, outdated and non user friendly equipment. Thereafter presenting the working model to appropriate bodies in order to facilitate a huge reduction in what has become a costly and awkward system to run and maintain for all parties. To achieve this, research in what defines a fall will be carried out as well as research for application creation using the processing language and motion detection programming using the available software development kits provided by the ring developers. Current fall detection applications will be researched to compare and improve on proposed model. To achieve this, research will be carried out to determine what defines a fall in the current system, as well as the range of fall detection applications currently available. Following this, research will be required into the most appropriate type of application creation tools to use in the working model. Tools include the type of processing language required and the particular motion detection programming available through the software development kits provided by the ring developers. Comparisons will be drawn from research findings in order to discover what improvements could be made on the proposed working model. 4. Objectives 5. Justification 6. Literature Review The purpose of the papers read is how to define the fall within the scope of the project and what technologies are best suited to project. With this in mind the following papers contain information on fall detection and the different technologies that may be used to complete a project of this type. Challenges, issues and trends in fall detection systems by Raul Igual, Carlos Medrano, and Inmaculada Plaza: Published online July 6 2013 in the BioMedical Engineering OnLine Fall detection system using Kinect’s infrared sensor by Georgios Mastorakis and Dimitrios Makris : Published December 2014 in the Journal of Real-Time Image Processing Heterogeneous multi-sensor fusion based on an evidential network for fall detection by Paulo Armando CAVALCANTE AGUILAR, Jerome Boudy, Dan Istrate, et. Al.: Submitted to HAL on the 14 Dec 2012. Accurate, Fast Fall Detection Using Gyroscopes and Accelerometer-Derived Posture Information By Qiang Li, John A. Stankovic, et. Al. Challenges, issues and trends in fall detection systems: this paper covers many of the different studies already taken place. It details the devices and methods used to detect falls. Fall detection system using Kinect’s infrared sensor : This paper cover the use of the xbox’s kinect sensors in fall detection. The same technology used in the nod ring. Heterogeneous multi-sensor fusion based on an evidential network for fall detection : covers how the network is used to alert and detect the falls. Accurate, Fast Fall Detection Using Gyroscopes and Accelerometer-Derived Posture Information: covers how the bodies position is used with accelerometers and gyroscopes to detect falls. 7. Methodology The research required to enable completion of the project will the follow the flow diagram used within Objectives. Secondary research will be carried out into what defines a fall. This will require papers, articles, books and websites to be read on the definition of what constitutes a fall. The information gained from this research will be compared and contrasted in to tables to analyse what movements and positions best constitute a fall and will cover the most appropriate scenarios for the system model. During this research any currently available algorithms, diagrams and coding will be collated, analysed and used to determine the fall definition selected for the project. Another aspect required for the system model is the final position of the fall and the time of inactivity that would indicate a fall. The data will be collated and analysed using graphs and diagrams to select the most appropriate solution that encompasses the most data to create an all-encompassing fall detection system. Time inactivity data will be collected from research data to compare and contrast time retrieved to select the median figure for inactivity and use this in the development of the system. Then all the collated data will be compared analysed and a conclusion drawn, showing the best options for the project, and the development of the equations required for coding of the device sensors. Once a fall definition has been selected the language used to program the device sensors needs to be researched and learned. The sensor device has available software developer’s kits (SDK) for android, iOS and UNIX among others. The use of these kits will require a steep learning curve and require reading and taking practical courses on learning the languages required. Learning the language, will be achieved through books, online courses and available API’s and code. The Project Supervisor will assist in the project ensuring the correct language is used and coding is fit for purpose. Although the ring comes with its own software, other methods of programming appropriate to the current skill set will be researched, by contacting developers through the developer’s forum and other programmers to assist with programming the sensors. At this stage any compatibility issues with the sensor and devices will be noted and used during the testing of the completed model to facilitate improvements. During the process of learning the coding language, the programming of the ring using this knowledge will be initiated. Sample codes will be modified and tested by programming the device to test functionality. Current fall technology research will include investigating current papers, applications and systems. Available current applications will be compared against the proposed project model to determine possible areas for improvement. Initial alert sending programming will be programmed within the rings SDK, producing results of positive fall detection and sending them to a receiving device. Knowledge and programming developed during research will be used to complete alert programming. Testing will be carried out using simulated alerts on various platforms, at different distances from sensor to base station. Results will be collated and displayed in graphs showing comparisons and analysis. The alert sending system which sends messages to mobile phones and emails will be programmed using the SDK or language used to program other functions. The completed model is to be tested using actual falls which creates an ethical issue. To address this issue local martial arts instructors will be approached to request their assistance with testing. The instructors will be asked to provide the test equipment to classes in order to record falls that take place during normal class activities. To fulfil any ethical considerations these tests will be recorded and the appropriate paperwork for consent obtained. These tests will ensure fall detection, alerts sending and receiving and the effective range of the system. The results will then be collated and reproduced in graphs, tables and illustrations to demonstrate success and failure rates, distance achieved and sending and receiving times. Future developments are investigated through searching for additional functionality of the sensor devices used within the model and possible cost effective additions which, when added to the system model improve the project and add features resulting in a reliable care model. The final step will be compiling the report for submission. This will done by pooling all research, tables, graphs and coding into the documentation required for the MSc project. 8. Work Plan The MSc Smart Networks course leader has stated the project must be completed and submitted for marking so graduation can be achieved in December or January. With this is mind the completed project must be submitted to lecturer in plenty of time to allow for marking and external evaluation. To ensure this is the case a final submission date of October 30th 2015 has been selected with a start date of the 22nd of June 2015. A draft submission is to be submitted no later than the 25th of September. Timeline As a literature review is a learning and development process this will be an ongoing method from June to the end of September. Programming and initial testing will commence in the first week in July and continue until a completed model is ready for final testing. Final testing is to commence in the third week of September and last for two weeks. Compiling of data and research will be compiled as an ongoing process, however writing the project will start in earnest at the same time as final testing. Due to the complexity of the project fortnightly meetings / tutorial sessions will be arranged with the supervisor. 9. References

After coming to America Essay -- Essays Papers

After coming to America All people seem to want the same basic things out of life regardless of race or religion. Universally, people want a good job, a healthy family, and a chance for their children to have a better life than the one they have. Families that already possess these things, whether through their own hard work or merely by way of inheritance, rely on the existing power structures within society to ensure that their future happiness continues . But what do people who do not belong to existing power structures turn to in order to secure these things for their families and children? During the course of America's lifetime, million upon millions of people left their homes and families in other countries and traveled to America in the hope of securing a better life -- the American Dream. What they often found was an unwillingness on the part of those already established in America to share society's benefits with them. For many segments of our American society, people substituted a reliance on family, or friends, or even faith alone, to secure these benefits for themselves and their children that was denied them by those possessing economic and political power. Most blacks came to America involuntarily. Sold as slaves in Africa, they were brought to America as laborers. Being slaves, they were legally considered property and thus were excluded from the legal protections that other people living in America were entitled to. Slave marriages were not legally recognized, and parents and children could be separated at the whim of their owners. As Frederick Douglass and countless other narratives by former slaves have shown us, slaves were forced to rely on a network of extended family members and other slaves to ... ...f ethnic communities that make up our cities is a testament to that reliance on friends that supported these groups of immigrants. While relying on friends and community would ensure that their family was both fed and that they had a place to sleep, faith is what kept hope alive in them from day to day. Faith that, one day, society would allow their children to fully participate in this country. And sometimes, as Thomas Aquinas told us, faith is all we have to have. Works Cited Boroff, David. "A Little Milk, a Little Honey: Jewish Immigrants in America." 1966. Oates. 87-97. Burns, James MacGregor. "Reconstruction: The Revolution that Failed." 1981. Oates. 20-29. Foner, Eric. "From Slavery to Freedom: The Birth of the Modern Black Community. 1990. Oates. 4-16. Oates, Stephen B., Ed. Portrait of America. Sixth Ed. Boston: Houghton-Mifflin, 1995.

Directing Hamlet Essay

If I were to have the pleasure of directing â€Å"Hamlet† I would first think about how and where the scene would be set. I would have the scene set in the suburbs of Italy where the ‘gangsters’ are, because the portrayal of gangster Italy, on television (which the audience may be familiar with) is like the situation in Hamlet. Where revenge must be taken by the son, also upholding the family honour and such family situations. Also the portrayal of Italians is that they are very religious and that they tend to be Catholics, so the religious aspect of this scene (trying to pray and having the need to be forgiven by god) would fit in with my version and Shakespeare’s. I would have this scene set in a Roman Catholic Church to support the fact that Claudius wishes to pray here and that he is Catholic. I would like the church to echo the voices to show that Claudius’ heart must be empty for him to have committed this evil crime, so all he hears is the voices of his head, telling him what he thinks is the right thing to do, for example to pray for forgiveness. However his heart would be telling him to give up the things that he killed for, which Claudius himself mentions, â€Å"since I am still possess’d of those effects for which I did the murder†. I would like the lighting to be an orangey afternoon colour, like when the sun sets. I imagine churches to be empty around early sunset time and if Claudius really felt guilty he would not want people o see that he is unable to pray I would not have any sound effects as the church would echo and I would like the audience to focus on what the actors were saying. Also silence between lines tends to create a sense of atmosphere. It would make the audience feel tense as though something was about to happen. I would like Claudius to look into the mirror when he is talking to himself throughout most of the scene. Except when it is inappropriate, for instance when he goes to pray. I would like the audience to feel more relaxed by this, as Claudius does not seem to be very emotionally at thins. I would like the audience to feel quite angry with Claudius. I would like them to feel this as they can see that he is not mentally disturbed by the goings on. However when Hamlet goes to talk to himself I would like to have him talking to the audience to show that although Hamlet said in an earlier scene that he would pretend to go mad, â€Å"How strange or odd some’er I bear myself-As perchance hereafter shall think meet to put an antic disposition on† all the frustration about getting revenge and his fathers murder may have actually driven him mad. I feel that having Hamlet talk to the audience shows this, as the other members of the play do not seem to be able to see the audience (King Claudius talking to himself in the mirror). I would like the audience to be shocked, by this and feel on edge as this scene is all about whether Hamlet will kill the king or not which is very tense. Since Claudius is a King in Shakespeare’s Hamlet I would like him to play someone of high importance, so I would have him being played as a gangster leader. The outfit I would like him to wear would be a grey Armani suit, a waistcoat, blue collared shirt, and patent leather shoes. I would like him to have square framed glasses and for him to wear lots of gold jewellery, but especially a gold signant ring to symbolise that he is the leader of a gang, which has resemblance to the fact that he is a king (monarchs wear a ring to show that they are married to their country). I would like Hamlet to be wearing rather informal clothes to show that he may have gone slightly mad. I would have him wearing a plain black shirt, which would be reasonably tight. I would then have him wearing a black Hawaiian shirt with a thatched pattern on it. I would also like him to be wearing dark blue jeans. The dark clothes would be symbolising that Hamlet is still in mourning for his father’s death. I would like Hamlet to be wearing a silver Saint Christopher around his neck, to show that Hamlet may need guidance for the revenge of his father’s death. I would like to keep the language the same as I feel that if the text were to be converted into modern language the impact of the rhythm and words would be lost. Such as when Claudius says, â€Å"It hath the primal eldest curse upon’t,† means â€Å"It’s like when the first murder happened in the bible†. These words do not have nearly as much effect as the original line. The original line provides some atmosphere. The word ‘curse’ suggests evil, as witches were thought in Shakespeare’s time to send curses. Also as people were more religious in Shakespeare’s time the fact that Claudius has committed the worst sin n the bible they may have been horrified by Claudius’ crime. This wouldn’t have as much effect on a modern day audience however I feel that the words too tend to portray that Claudius shows disgust towards himself. Some of the words in this scene are quite difficult to interpret so I would have to make some sort of gesture in order to make it more obvious what the two actors mean. I think that obvious hand or body gestures would make it more obvious. For example when Hamlet says, â€Å"Up, sword, and know thou a more horrid hent† I think that Hamlet should, lift his sword and then approach Claudius. This would make the true meaning of the sentence clearer. A few lines in this scene make it so enjoyable to watch, but it all depends on the actor’s interpretation and delivery of the line. When Claudius says, â€Å"O, my offence is rank† This line needs to be emphasised as it shows that Claudius may be feeling regret for what he did. So he could show this by shouting the line, which displays the anger that he may be feeling with himself. Also â€Å"a brothers murder† must be emphasised as this is the reason to Claudius guilt, and why he is so angry with himself. He could portray this to the audience by saying it slowly, and going into an audible whisper as if someone may hear. Claudius should also emphasise when he says, â€Å"Forgive me my foul murder!† as this shows that maybe he does truly repent and feel guilt. He could shout this line to the ceiling as if he were talking to god. When Claudius talks of the things he does not wish to give up, â€Å"My crown, mine own ambition, and my queen. † The should be said in a low husky tone, to show that Claudius although in this scene he may seem to be wanting forgiveness, he does not truly want it as he would give up these items that he killed his brother for. When Claudius is describing how in the criminal world he can ‘buy himself out of trouble’, â€Å"In the corrupted currents of this world†. This line and the following three lines should also be delivered in the same low husky tone to show that Claudius is still evil as to mix himself with criminals, who were also known as sinners in Shakespeare’s time. Also when Claudius talks to his knees, telling them to, â€Å"Bow stubborn knees† he should speak softly as though here were speaking to a child. This would emphasise the line and show that Claudius is encouraging himself to pray; just a children are encouraged when spoken to in a soft voice. The line he says, â€Å"All may be well† should also be softly as he trying to convince himself that everything will be all right. It is the final two lines that should be emphasised the most as this show the true irony of the whole scene. Hamlet decides not to kill Claudius, as he believes that Claudius is praying and would go straight to heaven. Here when Claudius says, â€Å"My words fly up, my thoughts remain below. Words without thought never to heaven go. † We learn that he was unable to pray anyway so Hamlet could have killed Claudius, only Hamlet did not know this. His line could be emphasised with pauses in between up and my, and in-between thought and never. When Hamlet says â€Å"And now I’ll do it†. I think here the actor should raise his sword above his head and increase the volume of his voice to a shout. Hamlet should then approach Claudius and let out a war like cry to emphasise this line. This I feel is effective as it emphasises this line and the silence that would follow would also emphasise the next line, â€Å"and so ‘a goes to heaven. † I think that those two lines are very important as they show that Hamlet is about to kill Claudius until he decides that he’ll wait. I also think that when Hamlet is talking about the death of his father, â€Å"‘A took my father grossly†, he should speak through his teeth, in a low tone. I feel that Hamlet would be feeling very angry, as he cannot yet revenge his father’s death. So I feel that that talking through his teeth would portray that anger to the audience. This also emphasises the line as the audience would listen to what he was saying as him talking through his teeth would be obvious to them. Hamlet, however should speak with joy when he talks about what kind if thing Claudius will be doing when Hamlet could kill him, â€Å"When he is drunk asleep, or in rage; Or in th’ incestuous pleasure of his bed; At game, a-swearing, or about some act†. I feel that Hamlet would be imagining Claudius being killed and going straight to hell, which would make him very happy. I then think that when Hamlet delivers this last line, â€Å"this physic but prolongs thy sickly days†. It must be emphasised as Hamlet would be feeling quite sad and angry that he has Claudius in very vulnerable position yet he feels that he cannot kill him, as that would not give him true revenge. I feel that sadness and anger can be portrayed by Hamlet having a pause between physic and but. Also the actor should speak in a low tone to get the audience’ attention as this line displays the irony as Claudius is unable to pray. This scene is only effective because the audience knows what happened in the previous scene. They know that Claudius has portrayed his true guilt to Hamlet, confirming Hamlet’s beliefs that Claudius killed his father. The way in which he did show his guilt, (When the players put on a play with a murder committed the same way that he killed his brother) would be more effective in Shakespeare’s time as then all people who committed murder were believed to go mad, and be affected by the site of their crime. When Claudius views his crime he horrified by himself and feels the need to be forgiven which explains his sudden desperate need to pray. I feel that this scene gives Hamlet its edge of tenseness. The rest of the play is an unwinding tale leaving the audience wondering right until the last scene, will Hamlet kill Claudius?

Free Essays on Barbara Ehrenreich

Book Critique I’ve never read one of Barbara Ehrenreich’s books but I might have to check one of them out after reading Nickeled and Dimed. I admired the argument, actually enjoyed reading for a change, and also learned a lot from every page. When I finished the book, I looked at it as what I only can call loathing. Writing up for the rich the results of an upper class essayist’s anthropological mission to see how the other half live is worthwhile. It is part of the task of affiliating the comfortable, which needs to be carried out much more strongly if we are ever to have a better society. The point of Ehrenreich’s rapiers of intellect, art, and wit are ever more prevalent when she points out that even so-called â€Å"unskilled† work- is demanding and challenging: the memory skills required of a waitress, the physical labor of a house cleaner with a vacuum on her back, and the patience of a wal-mart â€Å"zoner† hanging up the same blouse for the nin th time can push human capacities close to their limits- and for the truly lousy pay. I feel that the focus or purpose of her writings were to remind her readers that every job is worth doing well, and that people who do it well deserve respect: â€Å"†¦when I wake up at 4 A.M. in my own cold sweat, I am thinking of the table where I screwed up the order and one of the kids didn’t get his kiddie meal until the rest of the family had moved on to their Key lime pies.† That is something that her readers need to hear more often. So maybe the next time their (the readers) order isn’t perfect they’ll show a little patience and understanding, with their waiter or waitress. Mrs. Ehrenreich often found it a struggle to make ends meet even though she was working two jobs, seven days a week. Something is terribly wrong with this picture. A white, middle aged, capable woman with dependable transportation can’t support herself working two jobs. Even she admits that she... Free Essays on Barbara Ehrenreich Free Essays on Barbara Ehrenreich Book Critique I’ve never read one of Barbara Ehrenreich’s books but I might have to check one of them out after reading Nickeled and Dimed. I admired the argument, actually enjoyed reading for a change, and also learned a lot from every page. When I finished the book, I looked at it as what I only can call loathing. Writing up for the rich the results of an upper class essayist’s anthropological mission to see how the other half live is worthwhile. It is part of the task of affiliating the comfortable, which needs to be carried out much more strongly if we are ever to have a better society. The point of Ehrenreich’s rapiers of intellect, art, and wit are ever more prevalent when she points out that even so-called â€Å"unskilled† work- is demanding and challenging: the memory skills required of a waitress, the physical labor of a house cleaner with a vacuum on her back, and the patience of a wal-mart â€Å"zoner† hanging up the same blouse for the nin th time can push human capacities close to their limits- and for the truly lousy pay. I feel that the focus or purpose of her writings were to remind her readers that every job is worth doing well, and that people who do it well deserve respect: â€Å"†¦when I wake up at 4 A.M. in my own cold sweat, I am thinking of the table where I screwed up the order and one of the kids didn’t get his kiddie meal until the rest of the family had moved on to their Key lime pies.† That is something that her readers need to hear more often. So maybe the next time their (the readers) order isn’t perfect they’ll show a little patience and understanding, with their waiter or waitress. Mrs. Ehrenreich often found it a struggle to make ends meet even though she was working two jobs, seven days a week. Something is terribly wrong with this picture. A white, middle aged, capable woman with dependable transportation can’t support herself working two jobs. Even she admits that she...

When a Pronoun is the Subject of an Infinitive…

When a Pronoun is the Subject of an Infinitive†¦ When a Pronoun is the Subject of an Infinitive When a Pronoun is the Subject of an Infinitive By Maeve Maddox Ive written several posts about the error of beginning a sentence with an object form of the pronoun. For example: Me and my brother want to get matching tattoos. Her and her husband want to buy a digital camera. The neighbors and us decided In each of these examples, the pronoun is being used as the subject of a verb. Because the pronoun is standing as the subject of the verb, the subject form of the pronoun is called for: My brother and I want to She and her husband want The neighbors and we decided There is, however, a grammatical context in which the object form of a pronoun may correctly stand in front of a verb form. The exception occurs when a pronoun stands in front of an infinitive. Reminder: the infinitive form of the verb is the present form with to in front of it: Ex. to go, to seem, to run, etc. When a pronoun precedes an infinitive, it takes the object form: My mother wants me to learn computer programming. We never expected them to move away. The principal told him and the other boy to go home. Here, taken from the web, are some examples of pronoun errors with the infinitive: They told my friend and I to get up and move. I wanted he and I to watch our kids grow up together My parents expected my brother and I to do well in school. Corrections: They told my friend and me to get up and move. I wanted him and me to watch our kids grow up together My parents expected my brother and me to do well in school. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Grammar category, check our popular posts, or choose a related post below:Has vs. HadAnyone vs. Everyone75 Synonyms for â€Å"Hard†

Final case Analysis for Richardson Drilling Essay

Final case Analysis for Richardson Drilling - Essay Example After some months, when Jacob took over as the sales person in Latin America, he discovered certain facts by going through files of the earlier sales representatives. The Latin American area under Jacob also included some US territory and when Jacob went over the old reports, he noticed that quite a few US companies had stopped purchasing Richardson equipment; there was no apparent explanation for these customers to have moved away from Richardson. After some enquiry with these clients, Jacob discovered that these companies had suffered accidents, almost seven years back, due to a failed liner from Richardson. However, in spite of the companies complaining to the sales rep and the fact that Richardson’s President had also visited, no corrective measures had been taken. In all the above three cases sited here, the common factor is that Richardson has taken advantage of the less restrictive rules (compared to US) in other places such as Mexico, Brazil, and other Latin American countries, to bribe, and push substandard supplies, which they would not be able to sell inside the US or to other countries, for example in Europe, who would have strict quality regulations. So, these are ethical issues. Though Jacob had not reacted about the bribes, he was morally upset by the loss of lives and decided to talk to his boss, Hillary; she thanked him for the information but advised him to keep quite till the seven year statute, regarding limitations, was over. As recourse Hillary also said that in case this became known, then Richardson would download the inventory on Venezuela or Brazil where laws were less restrictive. Both these again were ethical issues. Sometime after, Jacob went to finalize a deal in Mexico with ARMCO; the deal was for $50 million and after it was signed Jacob again bribed an ARMCO person with $50 thousand. Hillary congratulated Jacob and promised him a bonus and a probable promotion. Both of these again raise ethical concerns. While all these

MGMT305 U4 IP Essay Example | Topics and Well Written Essays - 1250 words

MGMT305 U4 IP - Essay Example This whole process involves about 29 labour intensive and time consuming steps to manufacture the boards. To enhance efficiency and attract more customers, Firewire moved from the multifaceted production process to the CAD system that allows it to customize boards to elite customers. Furthermore, it uses a ShapeLogic NX software that allows its customers to feed the CAD, experiment with the designs, and integrate it with the computer numerical control (CNC) process. This software also provides its customers with an online system for customization that has advanced CAD tools and a web-based interface feature. This is Firewire’s most essential logistical infrastructure. A customer generates the model through the system which is directly transmitted to the factory for the manufacture. The major operations of Firewire are the manufacturing, marketing, distribution and sale of the surfboards. However, much of this is done online. The company thrives on innovation having engineered the first main change in the composition of surfboards for about 40 years. The materials used comprise of expanded polystyrene foam and epoxy resins. Distribution and sale of products entails the customers making modifications to the intended designs and even sharing with fellow surfers to seek their opinions before ordering for the same. This is attained through interactive communication among customers who after using the products reports the same to friends and colleagues who then visit the company’s website thus, leading to the creation of a marketing buzz for boosting of sales. Basically, the company’s marketing and sale of the surfboards is made through an online-based social networking process that allows for the sharing of the unique design files among various customers. The main form of technology used for production of the surfboards is a computer-aided design (CAD) that has been integrated with a